Roland A-49 - MIDI Keyboard Controller (White) - Manual (Page 27)

27
To change settings for the A-49, you need to be in FUNCTION mode.
Parameter Factory setting Explanation Page
VELO CURVE 1-MEDIUM
When you play the A-49’s keyboard, the transmitted
note message will include a velocity value (volume
data) corresponding to the force of your strike.
The VELO CURVE setting lets you choose the curve by
which the velocity value will change.
p. 28
KEY VELO TOUCH Specifies the velocity value of the keys you play. p. 29
SN SETTING MODE 0
Switches the function of the [C2] knob in SuperNATU-
RAL mode.
p. 29
[C1] knob Cutoff (CC#74)
Switches the functions assigned to the knobs, buttons,
and jacks.
p. 30
[C2] knob
Resonance
(CC#71)
[ASSIGN] button Aftertouch
[S1] button
Switches
the sound
(decrements
the program
change
number)
[S2] button
Switches
the sound
(increments
the program
change
number)
HOLD jack Hold (CC#64)
EXPRESSION jack
Expression
(CC#11)
CTRL DIR
Positive
direction
Specifies whether turning the knob toward the right
will transmit successively higher, or successively lower
values.
The same setting can be made for the D-BEAM
controller, buttons, and pedals.
p. 33
ADV ADVANCED
Specifies whether the A-49 will use the dedicated driver
described in “Installing the Dedicated Driver” (p. 13)
(ADVANCED), or the standard driver provided by the
operating system (GENERIC).
p. 33
FACT RESET —
Returns all of the A-49’s settings to their factory-set
state.
p. 34
Changing the A-49 Settings