Roland A-49 - MIDI Keyboard Controller (White) - Manual (Page 10)

10
Panel Descriptions
Panel
POWER indicator
This will light if the A-49
is connected to your
computer via USB.
[FUNCTION] button
If you press this button so
it’s lit, you can change the
MIDI channel or transmit
a program change by
pressing the appropriate
keys (p. 15).
[Pitch Bend/Modulation] lever
Use this lever to vary the pitch or
to apply vibrato (p. 22).
D-BEAM controller
Move your hand above
this to apply various
effects to the sound.
D-BEAM (p. 23)
[PITCH] button
If this is turned
on, the D-BEAM
controller will
control the pitch.
[VOL] button
If this is turned
on, the D-BEAM
controller will control
the volume.
[ASSIGN] button
If this is turned on, the
D-BEAM controller will
control the function you’ve
assigned. (Factory setting:
aftertouch)
[SuperNATURAL] button
If this is turned on, you’ll be
able to control a connected
SuperNATURAL sound module
(p. 16).
[C1][C2] knobs
Turn this knob to use the
function you’ve assigned
(p. 24).
[S1][S2] buttons
You can switch sounds by
pressing these buttons
(p. 19).