Roland RP30 88-Key Digital Piano (Dark Rosewood) - Manual (Page 6)

Setup
This section contains information about setting up your instrument and preparing to play. Please go through this section
carefully before turning the power on.
Setup Guide
Check that all the parts listed below are included before proceeding.
To assemble the stand, you will need a Philip's screwdriver (not supplied).
- Be careful not to pinch your hands or drop this unit on your foot during assembly or transport.
- Make sure to enlist the help of at least one other person when assembling this unit and moving it to a different location.
- After firmly tightening all the screws, place the unit at a location that is level and sure to remain stable.
- The surface of the piano unit and the stand are very delicate; handle with care to avoid scratching them.
- Do not place the piano unit directly on the floor. Doing so will damage the connectors and holders on the bottom of the piano.
06
1. Piano body
2. Left leg component
3. Right leg component
4. Back board
5. Pedal box
6. Screws 4 x 15BA (8 pcs)
7. Screws M6 x 40 (4 pcs)
8. Plastic cap (4 pcs)
9. Hand screws (4 pcs)
10. Pedal cable
11. AC adaptor
1
5
6
7
8
9
10
11
2
4 3