Roland GO:PIANO88 88-Note Digital Piano with Onboard Bluetooth Speakers - Manual (Page 5)

Panel Description
Setup
Rear Panel
16. DC IN Jack
Connect the specified power adaptor.
17. PHONES/OUTPUT Jack
Connect a pair of stereo headphones or
external audio equipment.
18. SUSTAIN Jack
Connect the included pedal.
19. USB Jack
Connect to a computer.
Connecting to Power Supply
You can power the instrument either by using the included power adaptor
or by using batteries.
Using Power Adaptor
1. Choose the included adaptor plug that fits the type of AC outlet used in
your region. Follow the images to slide the adaptor plug into the
grooves of the power adaptor unit.
2.
Connect one end of the power adaptor to the DC IN jack on the rear
panel of the instrument.
3. Plug the power adaptor into an appropriate AC outlet.
Notes
1. The adaptor plugs for the power adaptor are only for use with this
instrument. Do not use them with any other device. Do not attach
anything other than the included adaptor plugs to the power adaptor.
2. For your safety, please unplug the instrument when it is not in use or
during a thunderstorm.
Using Batteries
The instrument requires six D-size alkaline batteries or equivalent for
power supply.
1. Open the battery compartment cover located on the bottom of the
instrument.
2.
Insert the batteries. Carefully follow the polarity markings on the cabinet.
3. Replace the compartment cover. Make sure it locks firmly in place.
Notes:
1. Do not mix used and new batteries.
2. Do not mix different types of batteries.
3. Remove the batteries from the instrument when it is not in use for a long
period of time.
Setting the Music Rest
A music rest is supplied with the instrument. You can easily attach it to the
instrument by inserting it into the slots at the rear of the panel.
05
16 17 18 19
Plug (the plug’s shape
may differ in your area)