Rear panel (for equipment connections), Panel descriptions security slot ( security lock), Power] button – Roland V-1200HDR Control Surface for the V-1200HD Video Switcher User Manual

Page 8: Dc in jack, External power connector, Usb port

Panel Descriptions

Security Slot ( SECURITY LOCK)

You can attach a commercially available

security lock here. For details, refer to the

following website:

http://www.kensington.com/

[POWER] Button

This turns the power on and off (p. 10).

DC IN Jack

This is for connecting the included AC adaptor.

* By default, ferrite cores are attached to the AC adaptor cable. The ferrite

cores are needed to prevent electromagnetic noise. Be careful to ensure

they are not removed.

* To prevent the inadvertent disruption of power to your unit (should the

plug be pulled out accidentally), and to avoid applying undue stress to

the jack, anchor the power cord using the cord hook, as shown in the

illustration.

Cord Hook

External Power Connector

This is for connecting an external power source.

NOTE

Using the AC adaptor and an external power source at the same time is not

possible.

Use an external power source capable of supplying power

at 36 W or higher.

Make sure that the wiring of the external power source

you want to connect matches the unit’s external power

connector. Connecting an external power source that has

different wiring might cause malfunction.

Be sure to supply DC power within the range of 9 V to 16

V. Using a voltage that is out of range might cause malfunction in the

external power source or the unit.

When using an external power source, be sure to refer to the owner’s manual

for the power source.

* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.
* Provide cable and adaptor plugs to match the connector configuration on the equipment you’re using.

AC Adaptor

Power Cord

To AC Outlet

Place the AC adaptor so the side with the indicator

(see illustration) faces upwards and the side with textual

information faces downwards. The indicator will light

when you plug the AC adaptor into an AC outlet.

USB MEMORY Connector

This is used when upgrading the unit’s system program.
When using a USB flash drive for the first time, be sure to format it on

the V-1200HD. For details, refer to the V-1200HD Owner’s Manual.
* Never turn off the power or remove a the USB flash drive while the

USB flash drive is being accessed.

* Carefully insert the USB flash drive all the way in—until it is firmly

in place.

USB Port

This is provided for future expansion.

Rear Panel (for Equipment Connections)