Samsung Q Series HW-Q600C 360W 3.1.2-Channel Dolby Atmos Soundbar System - Manual (Page 29)

ENG - 29
08 CONNECTING A MOBILE DEVICE
Connecting via Bluetooth
When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of
cabling.
• When you connect a paired Bluetooth device with the Soundbar off, the Soundbar automatically
turns on.
• The connection is limited to one TV or two Bluetooth devices at the same time.
SOUN
D
MOD
E
PAIR
OR
BT PAIRING
Bluetooth device
The initial connection
• When connecting to a new Bluetooth device, make sure the device is within 3.28 ft (1 m) distance.
1. Press the PAIR button on the remote control to enter the “ BT PAIRING ” mode.
(OR) a. Press the (Source) button on the top panel and then select “ BT ”.
“ BT ” changes to “ BT PAIRING ” in a few seconds automatically or changes to “ BT READY ” if
there is a connect record.
b. When “ BT READY ” appears, press and hold the (Source) button on the top panel of the
Soundbar for more than 5 seconds to display “ BT PAIRING ”.
2. On your device, select “ [AV]Samsung Soundbar Q6C-Series ” from the list that appears.
• When the Soundbar is connected to the Mobile device, [ Mobile Device Name ] → “ BT ” appears in
the front display.
3. Play music files from the device connected via Bluetooth through the Soundbar.
• After you have connected the Soundbar to your mobile device the first time, use the “ BT
READY ” mode to reconnect.