Samsung Q Series HW-Q600C 360W 3.1.2-Channel Dolby Atmos Soundbar System - Manual (Page 24)

ENG - 24
Method 3. Connecting via Bluetooth
When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.
• Only one TV can be connected at a time.
SOUN
D
MOD
E
PAIR
OR
BT PAIRING
The initial connection
1. Press the PAIR button on the remote control to enter the “ BT PAIRING ” mode.
(OR) a. Press the (Source) button on the top panel and then select “ BT ”.
“ BT ” changes to “ BT PAIRING ” in a few seconds automatically or changes to “ BT READY ” if
there is a connect record.
b. When “ BT READY ” appears, press and hold the (Source) button on the top panel of the
Soundbar for more than 5 seconds to display “ BT PAIRING ”.
2. Select Bluetooth mode on the TV. (For more information, see the TV’s manual.)
3. Select “ Soundbar Q6C-Series(Bluetooth) ” from the list on TV’s screen.
An available Soundbar is indicated with “ Need Pairing ” or “ Paired ” on the TV’s Bluetooth device
list. To connect the TV to the Soundbar, select the message, and then establish a connection.
• When the TV is connected, [ TV Name ] → “ BT ” appears on the Soundbar’s front display.
4. You can now hear TV sound from the Soundbar.
• After you have connected the Soundbar to your TV the first time, use the “ BT READY ” mode to
reconnect.
If the device fails to connect
• If a previously connected Soundbar listing (e.g. “ Soundbar Q6C-Series(Bluetooth) ”) appears in the
list, delete it.
• Then repeat steps 1 through 3.