Auto source switching, Primary source recovery, Primary source – Samsung VM55B-U 55" Video Wall Display User Manual
Page 56: Secondary source, Power control, Auto power on, Auto source switching 56, Power control 56, Auto power on 56
56
Auto Source Switching
MENU
m
→
System
→
Auto Source Switching
→
ENTER
E
Turning on the display with
Auto Source Switching
On
, and the previous video source selection
is not active, the display will automatically search the different video input sources for active
video.
Auto Source Switching
When the
Auto Source Switching
is
On
, the display video source will automatically be searched
for active video.
The
Primary Source
selection will be activated, if the current video source is not recognized.
Secondary Source
selection will become active, if no primary video source is available.
If both the primary and secondary input sources are not recognized, the display will perform
two searches for an active source, each search checking the primary and then secondary
source. If both searches fail, the display will return to the first video source and display a
message indicating that there is no signal.
When the
Primary Source
selection is set to
All
, the display will search all the video source
inputs twice in sequence looking for an active video source, returning back to the first video
source in the sequence if no video is found.
Primary Source Recovery
Select whether to restore the selected primary input source when a primary input source is
activated.
―
The
Primary Source Recovery
function is disabled if
Primary Source
is set to
All
.
Primary Source
Specify
Primary Source
for the automatic input source.
Secondary Source
Specify
Secondary Source
for the automatic input source.
Power Control
MENU
m
→
System
→
Power Control
→
ENTER
E
Auto Power On
This feature automatically turns on the product as soon as it is plugged in. Pressing the power
button is not needed.
•
Off
/
On