Samsung VM55B-U 55" Video Wall Display - Manual (Page 14)

14
Parts
Reverse Side
―
The color and shape of parts may differ from what is shown.
Specifications are subject to change without notice to improve quality.
Port Description
IR OUT Receives the remote control signal via the external sensor board and outputs the
signal via LOOP OUT.
IR IN Supplies power to the external sensor board or receives the light sensor signal.
DVI IN Connects to a source device using a DVI cable or HDMI-DVI cable.
HDMI IN 1, HDMI IN 2 Connects to a source device using an HDMI cable.
DP IN Connects to a PC using a DP cable.
AUDIO OUT Outputs sound to an audio device via an audio cable.
AUDIO IN Receives sound from a source device via an audio cable.
RS232C OUT Connects to multiple products using a serial cable.
―
The serial cable is not provided with the product. Contact your vendor for
purchase.
RS232C IN Connects to MDC using an RS232C adapter.
DP OUT (LOOPOUT) Connects to another product using a DP cable.
―
When connecting monitors through DP Loopout, using the DP cable that came
with the package is recommended.
―
This port uses an algorithm that is specific to UHD resolution input and
output. The port is not compatible with monitors that have FHD content-
specific DP Loopout ports. Connecting Loopout ports between monitors of
the same model is recommended.
SERVICE Dedicated to service technicians.
RJ45 Connects to MDC using a LAN cable. (10/100 Mbps)