Samsung QHC Series 43" 4K UHD Commercial Monitor User Manual
Page 84
84
2nd
3rd
Description
Auto Source Switching
Auto Source Switching
Switch to preset source or another source when the main source device gets disconnected.
Primary Source Recovery
Select whether to restore the selected primary input source when a primary input source is activated.
"
The
Primary Source Recovery
function is disabled if
Primary Source
is set to
All
.
Primary Source
Select a primary source to switch to when no signals are received from the current input.
Secondary Source
Select a secondary source to switch to when no signals are received from the current input.
"
The
Secondary Source
function is disabled if
Primary Source
is set to
All
.
Default Input
Select the default input to switch to when the new input is disconnected. The
Last Input
option only includes external inputs
connected through cables.
"
Auto Source Switching
must be set to
New Input
to enable the
Default Input
option.
Power Control
Auto Power On
This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.
Max. Power Saving
Conserve power by turning off PC monitor when PC is not used for certain time.
Standby Control
When no signal is detected, it determines whether or not to enter sleep mode.
Remote Configuration
Keep the network connection active when the product is turned off.
Power Button
The power button on the remote control can be set to turn on the power or turn on or off the power.