Samsung QHC Series 43" 4K UHD Commercial Monitor - Manual (Page 25)

25
Connecting to a Video Device
• Do not connect the power cord before connecting all other cables.
Ensure you connect a source device first before connecting the power cord .
• You can connect a video device to the product using a cable.
" Press the SOURCE button on the remote control to change the source.
Using an HDMI Cable or HDMI to DVI Cable
• An HDMI cable supports digital video and audio signals, and does not require an audio
cable.
• The picture may not display normally (if at all) or the audio may not work if an external
device that uses an older version of HDMI mode is connected to the product. If such a
problem occurs, ask the manufacturer of the external device about the HDMI version and, if
out of date, request an upgrade.
• Be sure to use an HDMI cable with a thickness of 14 mm or less.
• Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a
connection error may occur.
• A basic high-speed HDMI cable or one with ethernet is recommended.
This product does not support the ethernet function through HDMI.
Connection Using an HDMI Cable
" Connecting parts may differ in different products.
HDMI 3 (ARC)
HDMI 2
HDMI 1
Connection Using an HDMI-DVI Cable
" Connecting parts may differ in different products.
• Audio will not be enabled if the product is connected to a video device using an HDMI-DVI
cable. To resolve this, additionally connect an audio cable to the audio ports on the product
and video device.
• After connecting a video device to the product with an HDMI-DVI cable, make sure to
configure the settings as shown below to enable the video and audio from the video device.
You can use the DVI port on the product as an HDMI port by using a DVI-HDMI adapter.
– Settings → Sound → set HDMI Sound to AV(HDMI)
" Sound settings may not be supported depending on the model.
– Settings → System → General → set HDMI Hot Plug to On
" Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p.
" UHD-enabled models can support up to UHD 30 Hz.
" Make sure to connect the same colour connectors together. (white to white, red to red, etc.)
HDMI 3 (ARC)
HDMI 2
HDMI 1