beautypg.com

Samsung MX-ST90B Sound Tower 1700W Wireless Party Speaker User Manual

Page 39

background image

ENG - 33

;

If there are obstacles between the Sound
Tower and your Bluetooth device, remove
or avoid the obstacles.

;

There may be sound drop when connected
to Samsung TV, please refer to page15
“Using Stereo Mode of Samsung TV” steps
to reconnect the Samsung TV.

;

The recommended operating distance
between Sound Tower and the BT device is

less than 32.8 ft (10 meters)

There is severe hum, noise, or distorted
sound when connected via Bluetooth.

;

If there are obstacles between the Sound
tower and your Bluetooth device, remove
or avoid the obstacles.

;

Some devices can cause radio interference
if they are located too close to the sound
tower. e. g. microwaves, wireless routers,
etc.

The PAIRING button is not working.

;

Try again after disconnecting the wireless
Group Play or Stereo mode connection.

The USB device is not recognized.

;

Switch the source to USB1/USB2 by

pressing the source button, plug-in the

USB device to correct port(USB1/USB2).

;

Turn off the sound tower, turn on the sound
tower, reconnect the USB device.

;

You may be using an unsupported USB
device. The USB storage device must be

formatted in FAT or FAT32.

Files in USB device cannot be played back.

;

Switch the source to USB1/USB2 by

pressing the source button, plug-in the

USB device to correct port(USB1/USB2).

;

You may using an unsupported USB device.
The USB storage device must be formatted

in FAT or FAT32.

;

The file format may not supported. Sound

tower only supports MP3,WMA,AAC,WAV

and FLAC file format.

;

Turn off the sound tower ,turn on the sound
tower, reconnect the USB device.

;

Files that are encrypted or protected by
passwords cannot be played back.

The connected USB device cannot be
charged.

;

USB port is only for USB storage device
playback.

Sound Tower does not output any sound via
AUX.

;

Make sure the external device is in AUX
output mode, and make sure sound tower

switch to AUX1 or AUX2 source.

;

Make sure the AUX cable is connected to

AUX1 or AUX2 securely.

;

The volume of the Sound Tower is too low
or muted. Adjust the volume.

;

When any external device (STB, Bluetooth
device, mobile device, etc.) is connected,
adjust the volume of the external device.

;

Remove the power plug, after a while
plug-in it again, Press the POWER button to
turn on the Sound Tower.