Samsung MX-ST90B Sound Tower 1700W Wireless Party Speaker - Manual (Page 22)

ENG - 16
04 CONNECTING AN EXTERNAL DEVICE
Connect to an external device via a wired or wireless network to play the external device’s sound
through the Sound Tower.
Connecting an External Device via Analog Audio Cable
A phone jack or RCA cable is a physical connection that transfers analog audio signals.
ECHO 1 VOL 1
AUX 1
MIC 1
- AUDIO - R L
ECHO 2 VOL 2 ECHO 1 VOL 1 MIC 2 USB1 (5V 2.1A) USB2 (5V 0.5A) AUX 1 MIC 1
POWER
Mobile device / MP3 / PMP
BD / DVD player / Set-top box / Game console
Rear of the Sound Tower
Audio (AUX) Cable (not supplied)
3.5 mm stereo cable (not supplied)
3.5 mm stereo Cable (AUX1)
1. Connect AUX1 jack on the main unit to the AUDIO OUT jack of the Source Device using a
3.5 mm stereo cable.
2. Select “ AUX1 ” mode by pressing the (Source) button on the top panel or on the remote control.
• You can also select a source using AUX button on the remote control.
RCA Cable (AUX2)
1. Connect AUX2 (IN) terminals on the main unit to the AUDIO OUT terminals of the Source Device
using an RCA cable.
2. Select “ AUX2 ” mode by pressing the (Source) button on the top panel or on the remote
control.
• You can also select a source using AUX button on the remote control.