beautypg.com

Connecting wireless group play mode – Samsung MX-ST90B Sound Tower 1700W Wireless Party Speaker User Manual

Page 16

background image

ENG - 10

– Make sure that the HOST is turned on, and has a music source connected to it, and the volume

is not muted.

Wired Group Play function does not work properly:

– Turn off the system. Then, turn it back on again to activate the function.

When a microphone is connected to the HOST and being used, the MIC sound is output to all the
connected Sound Towers in the group.

Connecting wireless Group Play mode

You can connect multiple audio systems in a wireless group play mode to create a more interesting
party environment and to produce higher sound output.

Precondition

• When connecting a Sound Tower, make sure it is within 3.28 ft (1 m) distance.

Cannot set the mode to Group Play mode when sound tower is connected to a TV.

Before using Group Play mode, any sound towers should be taken out of Stereo mode.

POWER

POWER

POWER

SUB 1

Sound Tower

Continue these

steps to

connect Sound

Towers until the

last one is

connected.

LED Blinks Slow(15s)

Waiting to enter

pairing mode

LED Blinks Fast(30s)

SUB Connection

available

HOST

Sound Tower

Last(S UB)

Sound Tower

Press the

GROUP PLAY

button on the HOST Sound Tower and wait until the “

GROUP PLAY

” LED

switches from blinking slowly to blinking quickly. This Sound Tower will become the Sound Tower
HOST.

※ Only BT source can be used, selecting another source will cause Group Play mode to disconnect.
※ Press and hold “GROUP PLAY” button for 5 seconds while the BT source is selected and the

Group Play LED will blink quickly immediately.

Press the

GROUP PLAY

button on the SUB Sound Tower, and it will begin searching for the HOST

while the “

GROUP PLAY

” LED blinks, and the LED will turn solid and the speaker will beep after

connecting to the HOST.

If less than 20 minutes have passed since Group Play button was pressed, refer to Step 2 to

connect additional SUB. If 20 minutes have passed since Group Play was pressed, repeat steps 1
and 2 to connect additional SUB.

Play music on the HOST Sound Tower. Sound outputs from all the connected systems.