Samsung MX-ST90B Sound Tower 1700W Wireless Party Speaker - Manual (Page 28)

ENG - 22
05 CONNECTING A USB STORAGE DEVICE
You can play music files located on USB storage devices through the Sound Tower.
LIGHT
PAIRING TEMPO
USB AUX
EFFECT EFFECT DJ
SOUND MODE
ECHO 2 VOL 2 ECHO 1 VOL 1 MIC 2 USB1 (5V 2.1A) USB2 (5V 0.5A) AUX 1 MIC 1
POWER
USB1
(5V 2.1A)
USB2
(5V 0.5A)
USB storage device
(not supplied)
USB1 white LED on
USB2 white LED on
Rear of the Sound Tower
OR
OR
1. Connect a USB storage device to the USB jacks on your Sound Tower.
2. Press the (Source) button on the top panel or USB button of remote control, and then select
“ USB ”.
3. The USB indicator on the top panel is solid and when the files on the USB are read, the Lighting
LED will blink blue. After reading the music file, the sound tower will automatically play the music.
※ The lighting LED blinks white once when pressing the button(TEMPO+/-, Repeat, FOLDER UP/DOWN, Play/
Pause, Skip) on remote control.
※ Using with the Sound Tower App will provide a better experience.
CAUTION
• DO NOT connect microphone dongle to the USB port, it may damage the Sound Tower.
NOTES
• This product only supports USB storage devices that are formatted in the FAT and FAT32 file
system.
• This product does not support HDD storage or storage on mobile devices.
• A maximum of 999 files can be played via USB storage device.
• A maximum of 256 folders can be read via USB storage device.
• The Sound Tower automatically turns off (Auto Power Down) if USB device is not connected,
playback stopped, or there is no input for more than 18 minutes
• USB source does not support wireless Stereo and Group Play mode.