Epson Printer Accessories - Manual (Page 7)

7
7
Follow the steps in this section to install the SpectroProofer in your printer.
Before using the SpectroProofer for the first time, you must also initialize it
as described on page 19.
Unpacking and Assembly
Unpack the SpectroProofer and make sure you have all the parts shown
below:
Setting Up the
SpectroProofer
Note:
The 44" model is shown.
These instructions also
apply to the 24" model.
Save the original box and
packing materials in case
you need to ship the
equipment.
Caution:
Be sure to check the box
and packaging material
thoroughly for any missing
items; pieces may have
shifted during shipment.
SpectroProofer
main unit
Backing plates
(24" kit)
Backing plates
(44" kit)
Mounting rails, bolts, and Allen wrench Spectrophotometer
(ILS20EP or ILS20EPUV)
Calibration tile
and holder
Power cord
(varies by region)
USB cable Cable hooks
OR