MIDEA 10,000 BTU U-shaped - Manual (Page 23)


Page 23

Review the installation and check for
any gaps or openings to the outdoor
air. Cover these gaps with the provided
foam ensuring no outdoor air leaks
inside. See image for areas to check
for gaps.
Use the window sash seal foam to
seal between the windows
Check for
Check
for Gaps
Use the thick window sash seal
foam to seal between the windows
Ins
tallation
Ins
tructions
IF AC IS BLOCKED BY STORM WINDOW
SASH
OUTSIDE INSIDE
1-1/2" min
(38 mm)
Board thickness as
required, for proper
pitch to rear, along
entire sill. Fasten
with nails or screws.
Storm window
frame or other
obstruction.
Add wood as shown, or remove
storm window before air conditioner
is installed.
If storm window frame must
remain, be sure the drain holes or
slots are not caulked or painted
shut. Accumulated rain water or
condensation must be allowed to
drain out.
You must secure the support
bracket to the added wood piece
using the provided 1” Type A
Screws. Refer to the Open Window
Bracket installation step.