MIDEA 10,000 BTU U-shaped - Manual (Page 21)


Page 21

NOTICE
For Window Track Openings
1/2” or less, re
m ove the
Anti-Tip Brackets and rotate
the
m so the s m aller end of
the bracket can be inserted
into the Window Track
Opening. THEY MUST STILL
BE INSTALLED, so keep
both Anti-Tip Brackets.
NOTICE
Side Ar m Foa m re m oved fro m
i m age for illustrative purposes.
Keep foa m in place during Anti-
Tip Bracket installation.
WARNING
You m ust extend the Anti-Tip
Brackets into the Window Track
Opening. Failure to follow this
warning
m ay cause serious injury.
Top view
Anti-Tip Bracket
Installed in Window
Track Opening
The images to the left show what a
properly installed Anti-Tip Bracket into
the window track should look like.
The images to the left show what a
properly installed Anti-Tip Bracket into
the window track should look like.
This side
faces indoors
If the Anti-Tip Brackets
need to be rotated, this is
the correct orientation
Ins
tallation
Ins
tructions
Top view
Extend into Window Track
Remove the factory installed 1/2”
screw and extend the Anti-Tip
Brackets into the window track.
Secure the Anti-Tip Brackets by
re-using the factory installed 1/2”
screw. Failing to use this screw
could damage the air conditioner.
Top of Unit