Elation Professional Event MH - Manual (Page 34)

Event MH™
©Elation Professional® 34 Event MH™
seconds to run the current scene.
12. Adjust the desired time by pressing [UP] or [DOWN] button.
13. Press [ENTER] to save the settings for the scene you are editing, the display will change
to the next scene automatically.
14. Repeat step 3-14 to edit and other scenes, you can edit and save a maximum of 48
scenes.
15. Press [MODE/ESC] to exit. The number of steps can be defined under “STEP” and the
scenes can be called up under “RUN”
b) Editing via the external controller
Call up the first scene in your controller now.
1. Select “SC01” by pressing [UP] or [DOWN] button
2. Press [ENTER], the display shows “SC01”.
3. Press [ENTER], the display shows “C-01”.
4. Select "CNIN" by pressing [UP] or [DOWN] button
5. Press [ENTER], the display shows "OFF".
6. Press [UP] or [DOWN] button, the display shows "ON".
7. Press [ENTER], the display shows "SC02". You successfully downloaded the first scene.
8. Adjust the Step-time as described above under point 12.
9. Call up the second scene in your controller now.
10. Repeat steps 5-11 until all desired scenes are downloaded.
11. Press [MODE/ESC] to exit. The number of steps can be defined under “STEP” and the
scenes can be called up under “RUN”