beautypg.com

Elation Professional Event MH User Manual

Page 30

background image


Event MH™

©Elation Professional® 30 Event MH™

2. Press [UP] to select “ON” if you wish to enable this function, press [DOWN] button to

“OFF” if you don’t,

With the function “REST” you can remove the device from wireless DMX.

4. Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.

- Software version

With this function you can display the software version of the device.

1. Select “VER” by pressing [UP] or [DOWN] button.

2. Press [ENTER], The display will show “V-XX”, "XX" stands for the version number, such

as the display may also show,"V-1.0","V-9.9"etc.

3. Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.

- Main menu 2

1. Press [MODE/ESC] to enter the main menu (display flashing).

2. Press [UP] or [DOWN] button to select “ADJU”.

- Lamp adjustment

With this function you can adjust the lamp via the Control Board. The shutter opens and the

lamp can be adjusted. In this mode, the device will not react to any control signal.

1. Select “LADJ” by pressing [UP] or [DOWN] button.

2. Press [ENTER], the display shows “ON” or “OFF”.

3. Press [UP] to select “ON” if you wish to enable this function or press [DOWN] button to

select “OFF” if you don’t.

4. Press [ENTER] to confirm or Press [MODE/ESC] to return to the main menu.

- Test function of each channel

This manual is related to the following products: