Elation Professional Event MH User Manual
Page 24
Event MH™
©Elation Professional® 24 Event MH™
Main Menu Functions
- Main menu 0
1. Press [MODE/ESC] to enter the main menu "MODE" (display flashing)
2. Press [ENTER] and select "ADDR", “RUN” or "DISP" by pressing [UP] or [DOWN]
button.
3. Press [ENTER] for selecting the desired sub menu.
- DMX address setting, Slave setting
- DMX address setting
With this function, you can adjust the desired DMX-address via the Control Board.
This function is used to set or adjust the fixture’s starting DMX address. Every device
controlled by DMX has to have a unique starting address. The addressing feature is what
allows DMX to function properly. The DMX address of a fixture is what allows it to
communicate with a controller properly. The DMX addressing also allows the fixture to
ignore any DMX information coming from the controller that is not meant specifically for the
fixture. Because each fixture is connected in a daisy-chain fashion it is imperative to assign a