Elation Professional Event MH - Manual (Page 11)

Event MH™
©Elation Professional® 11 Event MH™
menu system.
4) UP BUTTON – This button is used to scroll forward when navigating through the
fixture’s menu system.
5) DOWN BUTTON – This button is used to scroll backwards when navigating through
the fixture’s menu system.
6) ENTER BUTTON – This button is used to select and confirm a menu function.
7) HEAD FAN ASSEMBLY – This fan is used to cool the internal temperature of the
head assembly.
8) BASE ASSEMBLY – The main base holds the majority of the electronics and logic
boards. The base also provides a means to securely mount the fixture to the floor or
ceiling.
9) BATTERY POWER INPUT – This jack is used to supply the fixture with power from
the external battery pack. NEVER attempt to run the fixture on battery power
when the battery pack is plugged into wall power.
10) DMX OUTPUT JACK – This 3-pin XLR jack sends a DMX signal to another DMX
fixture. For best results this jack should be terminated if it is the last fixture in a DMX
daisy chain (see DMX termination on page 18).
11) DMX INPUT JACK – This 3-pin XLR jack is receives an incoming DMX signal from a
DMX controller.
12) FUSE HOLDER – This housing holds a 2A/250v GMA fuse and is designed to protect
the electronics in the event of severer power fluctuations. Never defeat this fuse. In
the event of fuse failure, always be sure to replace with an exact match fuse unless
other wise specified by an authorized Elation Professional technician.