beautypg.com

Specifications, Nproduct specifications – Sharp PN-U423 User Manual

Page 47

background image

47

E

Specifications

n

Product Specifications

Model

PN-U553

PN-U473

PN-U423

LCD component

55" Class [54-5/8 inch

(138.8cm) diagonal]

TFT LCD

47" Class [46-15/16

inch (119.3cm)

diagonal] TFT LCD

42" Class [42 inch

(106.7cm) diagonal]

TFT LCD

Max. resolution

(pixels)

1920 x 1080

Max. colors

Approx. 1.06 billion colors

Pixel pitch

0.630 mm (H) ×

0.630 mm (V)

0.542 mm (H) ×

0.542 mm (V)

0.485 mm (H) ×

0.485 mm (V)

Viewing angle

178° right/left/up/down (contrast ratio ≥ 10)

Screen active area

inch (mm)

47-5/8 (W) x 26-13/16 (H)

(1209.6 x 680.4)

40-15/16 (W) x 23 (H)

(1039.7 x 584.8)

36-5/8 (W) x 20-5/8 (H)

(930.2 x 523.3)

Computer input signal

Digital (DVI 1.0 standard-compliant), Analog RGB (0.7 Vp-p) [75 Ω],

DisplayPort 1.1

Sync signal

Horizontal/vertical separate (TTL: positive/negative)

Video color system

NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM

Plug and play

VESA DDC2B

Power management

VESA DPMS, DVI DMPM

Input terminals

PC/AV

HDMI x 1

PC

Mini D-sub 15 pin, 3 rows x 1

DisplayPort x 1

DVI-D 24 pin (HDCP compatible) x 1

AV

Component: BNC (Y, Cb/Pb, Cr/Pr) x 1*

1

Composite video: BNC x 1*

1

Audio

3.5 mm mini stereo jack x 1

RCA pin (L/R) x 1

Serial (RS-232C)

D-sub 9 pin x 1

Output terminals

PC

DVI-D 24 pin (HDCP compatible) x 1

Audio

RCA pin (L/R) x 1

Serial (RS-232C)

D-sub 9 pin x 1

LAN terminal

10 BASE-T/100 BASE-TX

Speaker output

10 W + 10 W

Power requirement

AC 100 - 240 V, 1.5 A,

50/60 Hz

AC 100 - 240 V, 1.5 A,

50/60 Hz

AC 100 - 240 V, 1.3 A,

50/60 Hz

Operating temperature *

2

41°F to 104°F

(5°C to 40°C) *

3

32°F to 104°F (0°C to 40°C)

Operating humidity

20% to 80% (no condensation)

Power consumption

(Input signal waiting mode / standby mode *

4

)

130 W (4.5 W / 4.5 W) 130 W (4.5 W / 4.5 W) 115 W (4.5 W / 4.5 W)

Dimensions (excluding protrusions)

inch (mm)

Approx. 49-3/16 (W) x

2-1/4 (D) x 28-3/8 (H)

(1250 x 57 x 721)

Approx. 42-5/8 (W) x

2-3/16 (D) x 24-11/16 (H)

(1083 x 55 x 627)

Approx. 38-5/16 (W) x

2-1/4 (D) x 22-1/4 (H)

(973 x 57 x 565)

Weight

lbs. (kg)

Approx. 55.2 (25)

Approx. 41.9 (19)

Approx. 35.3 (16)

*1

Cannot be used simultaneously.

*2

Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such

cases, please check the temperature condition specified by the optional equipments.

*3

Use of the monitors in temperatures below 50°F (10°C) might result in inconsistent image quality that, depending on the viewing angle,

might be noticeable along the edges of the screen. Please note that this is not a malfunction and does not affect monitor operation.

*4

When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 0.5 W

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement

without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from

these values in individual units.

This manual is related to the following products: