beautypg.com

Connecting peripheral equipment – Sharp PN-U423 User Manual

Page 11

background image

11

E

9

4

7

5

10

8

11

12

13 1

2

3

6

Connecting Peripheral Equipment

Caution

• Be sure to turn off the main power switch and disconnect

the plug from the power outlet before connecting/

disconnecting cables. Also, read the manual of the

equipment to be connected.

• Be careful not to confuse the input terminal with the output

terminal when connecting cables. Accidentally reversing

cables connected to the input and output terminals may

cause malfunctions and the other problems.

• Do not use any cable that has a damaged or deformed

terminal. Using such cables may cause malfunctions.

TIPS

• Images may not be displayed properly depending on the

computer (video card) to be connected.

• Use the automatic screen adjustment when a PC screen is

displayed for the first time using D-SUB, or when the setting

of the PC is changed. The screen is adjusted automatically

when SELF ADJUST in the SCREEN menu is set to ON.

• If the audio output from the playback device is connected

directly to speakers or other devices, the video on the

monitor may appear delayed from the audio portion.

Audio should be played through this monitor by connecting

the playback device to the monitor’s audio input, and

connecting the monitor’s audio output to the speakers or

other devices.

• The audio input terminals used in each input mode are

factory-set as follows.

Input mode

Audio input terminal

(Factory setting)

DVI-D, D-SUB

Audio1 input terminal

DisplayPort

DisplayPort input terminal

HDMI

HDMI input terminal

COMPONENT, VIDEO

Audio2 input terminals

1. HDMI input terminal

• Use a commercially available HDMI cable (conforming to

the HDMI standard).

• Select the audio input terminal to be used in AUDIO

SELECT of the SETUP menu.

When HDMI is selected, connection to the audio input

terminal is unnecessary.

2. DisplayPort input terminal

• Use a commercially available DisplayPort cable.

• Select the audio input terminal to be used in AUDIO

SELECT of the SETUP menu.

When DisplayPort is selected, connection to the audio

input terminal is unnecessary.

3. DVI-D input terminal

• Use a commercially available signal cable (DVI-D 24 pin).

• Select the audio input terminal to be used in AUDIO

SELECT of the SETUP menu.

4. D-sub input terminal

• Select the audio input terminal to be used in AUDIO

SELECT of the SETUP menu.

5. Component input terminals

• Select the audio input terminal to be used in AUDIO

SELECT of the SETUP menu.

6. Video input terminal

• Select the audio input terminal to be used in AUDIO

SELECT of the SETUP menu.

This manual is related to the following products: