Ricoh Pentax К-1 - Manual (Page 65)

3
Shoo
ting
63
1
Press C in standby mode.
The White Balance setting screen appears.
Turn the main switch to U to use Digital Preview when
shooting with the viewfinder.
2
Select the desired white
balance setting.
For k, o, and p, turn R to
select the type of white balance.
Available operations when shooting with the
viewfinder
Proceed to Step 5 if you do not need to fine-tune the white
balance.
3
Press G.
The fine-tuning screen appears.
Available operations
4
Press E.
The screen of Step 2 reappears.
5
Press E.
The camera returns to standby mode.
u Caution
• In R mode, the white balance is fixed to g.
• The Digital Preview operation in Step 1 is disabled when the
drive mode is set to [Mirror Lock-up Shooting], [Multi-
exposure], or [Interval Shooting].
t Memo
• When u is set, even if various light sources are present at
the shooting location, the camera automatically adjusts the
white balance according to the light source of each area. (u
is not available in C mode.)
• The following settings for the white balance can be set in the
E 3 menu.
Setting the White Balance
g Auto White Balance
u Multi Auto White Balance
h Daylight
i Shade
j Cloudy
k
q Fluorescent - Daylight Color
r Fluorescent - Daylight White
s Fluorescent - Cool White
t Fluorescent - Warm White
l Tungsten
n Color Temperature Enhancement
o Manual White Balance 1 to 3
p Color Temperature 1 to 3
H Saves the preview image (only
when the image can be saved).
WB± WB±
Auto White Balance Auto White Balance
Cancel Cancel Check Check OK OK
AB Adjust: Green-Magenta
CD Adjust: Blue-Amber
M Resets the adjustment value to the default
setting.
15 WB Adjustable Range Fixed, Auto Adjustment
16 AWB in Tungsten Light
Strong Correction, Subtle
Correction
17 WB When Using Flash
Auto White Balance, Multi
Auto White Balance,
Unchanged
18 Color Temperature Steps Kelvin, Mired
G3 G3 A2 A2
±0 ±0 Cancel Cancel OK OK
Auto White Balance Auto White Balance