Ricoh Pentax К-1 - Manual (Page 58)

3
Shoo
ting
56
1
Press A in standby mode.
The Drive Mode screen appears.
2
Select a drive mode.
u Caution
• There are restrictions on some drive modes when used in
combination with some other functions. (p.107)
t Memo
• The Drive Mode setting is saved even after the power is
turned off. If [Drive Mode] is set to Y (Off) in [Memory] of the
A
5 menu, the setting returns to [Single Frame Shooting]
when the power is turned off. (p.103)
• The [Shake Reduction] of the A4 menu is automatically set
to [OFF] when the drive mode is set to [Self-timer], [Remote
Control], or [Mirror Lock-up Shooting]. If you do not want to
turn off the Shake Reduction function, set in [21 Auto SR Off]
of the E3 menu.
Setting the Drive Mode
Single Frame
Shooting
(L)
Normal capture mode
Continuous
Shooting
(Z/a/b)
Continuously takes pictures while
0
is kept pressed. (p.57)
Self-timer
(O/P/Y)
Releases the shutter about 12
seconds or 2 seconds after 0 is
pressed. (p.57)
Remote Control
(Q/R/S) Enables shooting with remote control.
(p.58)
Bracketing
(T/1/U) Takes consecutive pictures at
different exposure levels. (p.59)
Mirror Lock-up
Shooting
(c/d)
Takes images with the mirror raised.
(p.60)
Multi-exposure
(V/z/W/X)
Creates a composite image by taking
multiple pictures and merging them
into a single image. (p.60)
Interval Shooting
(q/U/V/w) Automatically takes pictures at set
intervals. (p.61)
Single Frame Shooting Single Frame Shooting
Cancel Cancel OK OK
If Light Enters through the Viewfinder
When the drive mode that
employs the self-timer or remote
control is selected, exposure may
be affected by the light entering
through the viewfinder. In such a
case, use the AE Lock function or
attach the optional ME viewfinder
cap. Remove the eyecup before attaching the ME viewfinder
cap.