Ricoh Pentax К-1 - Manual (Page 44)

2
G
etting Started
42
Review the captured image on the monitor.
1
Press 3.
The camera enters playback
mode and the most recently
captured image is displayed
(single image display).
2
Review the captured image.
Available operations
t Memo
• When R is turned to the right to magnify the image, the
magnification is displayed at the bottom right of the screen.
z
appears when the image is displayed at the actual pixel
size (1× image display). You can set the initial magnification
when magnifying images in [Quick Zoom] of the B1 menu.
• When Hv is displayed on the monitor, the JPEG image
that was just taken can also be saved in RAW format (Save
RAW Data).
• You can display grid lines in single image display. Set in [Grid
Display] of [Image Display] in the B1 menu. (p.27)
Reviewing Images
C /Q to the left Displays the previous image.
D /Q to the right Displays the next image.
L Deletes the image.
R to the right Magnifies the image (up to
16×).
Use ABCD to change the
area to display.
Press M to return the display
area to the center.
Press E to return to the
entire image display.
R to the left Switches to the thumbnail
display (p.77).
d Switches between the SD1
card and the SD2 card.
1/ 2000 1/ 2000 F2.8 F2.8 200 200 0.0 0.0
100-0001 100-0001
H Saves the RAW data (only
when a JPEG image was
taken and the data remains in
the buffer).
G Changes the type of
information displayed (p.15).
B Displays the playback mode
palette (p.76).