Ricoh Pentax К-1 - Manual (Page 56)

3
Shoo
ting
54
You can set the position and range of the autofocusing area (AF
area).
1
Set the autofocus mode to g or h.
2
Press c.
3
Select the AF area.
Use the frame that appears on
the monitor to change the
position and size of the AF area.
Available operations
4
Press E.
The AF area is set.
t Memo
• For the autofocus operation when shooting with Live View,
the following settings can be set in [Contrast Detection AF] of
the A1 and C1 menus.
When [Focus Peaking] is set to [ON], the outline of the subject
in focus is emphasized, and this makes it easier to check the
focus. This function works in both v and w modes.
You can precisely fine-tune your lenses with the camera’s
autofocus system.
1
Select [25 AF Fine Adjustment] in E4 menu and
press D.
The [25 AF Fine Adjustment] screen appears.
2
Select [Apply All] or [Apply One] and press E.
3
Select [Setting] and adjust
the value.
Available operations
4
Press E.
The adjustment value is saved.
5
Press F twice.
The camera returns to standby mode.
Selecting the Desired Focusing Area
ABCD Changes the position of the AF area.
R
Increases/reduces the size of the AF
area (when g is selected).
M Returns the AF area to the center.
Contrast AF e , f, g, h, i
Focus Peaking ON, OFF
Contrast AF Options Focus-priority, Release-priority
OK OK
AF Fine Adjustment E 4
Apply All
Applies the same adjustment value to all
lenses.
Apply One
Saves an adjustment value for the lens being
used. (Up to 20 values)
D /R to the right Adjusts the focus to a closer
position.
C /R to the left Adjusts the focus to a farther
position.
M Resets the adjustment value
to the default setting.
±0 ±0
±0 ±0
3 3
25 25 AF Fine Adjustment AF Fine Adjustment
Apply One Apply One
Setting Setting
Reset Individual Settings Reset Individual Settings
Save Save Cancel Cancel