Ricoh Pentax К-1 - Manual (Page 60)

3
Shoo
ting
58
1
Select Q on the Drive Mode
screen and press B.
2
Use CD to select Q, R, or S.
Proceed to Step 6 when Q or R is selected.
3
Press G.
4
Set [Shooting Speed].
5
Press E.
The screen of Step 1 reappears.
6
Press E.
The camera returns to standby mode.
7
Press 0 halfway.
8
Point the remote control unit towards the remote
control receiver on the front of the camera, and
press the shutter release button on the remote
control unit.
t Memo
• The maximum operating distance of the remote control unit is
approximately 4 m from the front of the camera.
• To adjust focus with remote control, set in [10 AF with Remote
Control] of the E2 menu.
• When using the Remote Control Waterproof O-RC1, the
autofocus system can be operated with the q button on the
remote control unit. The r button cannot be used.
Remote Control
Q Remote Control
R
Remote Control (shutter release after about 3
seconds)
S Remote Control + Continuous Shooting
Remote Control Remote Control
Cancel Cancel OK OK
Remote Continuous Shooting Remote Continuous Shooting
Shooting Speed Shooting Speed
Cancel Cancel OK OK