FujiFilm X-Pro2 - Manual (Page 48)

30
Display Settings
The Hybrid (EVF/OVF/ERF) Viewfi nder The Hybrid (EVF/OVF/ERF) Viewfi nder
The features of the diff erent displays are described below.
Display Display Description Description
OVF OVF
The optical display is sharp and free of blur so that your subject’s expression is always visible. In addition, the
OVF shows the area just outside the frame, making it easier to compose shots on the fl y. Because the viewfi nder
window is a slight distance from the lens, the area visible in photographs may however diff er slightly from the
display in the viewfi nder due to parallax.
EVF EVF
The live view display gives you a preview of the fi nal picture (including depth of fi eld, focus, exposure, and white
balance) with exactly the same frame coverage.
ERF ERF
(dual display) (dual display)
As for the optical viewfi nder but with a focus preview. A magnifi ed view of an area of the frame including the
current focus position is shown at the bottom right corner of the display.
Bright Frame Simulation Bright Frame Simulation
The angle of view covered by the bright frame in the OVF display varies with the focal length of the
lens. Pressing a function button (by default, Fn2) displays a bright frame simulation that shows the area
covered by the bright frame at diff erent focal lengths.
R Keep the viewfi nder selector pressed up to toggle between the bright frames for maximum and minimum
aperture.
32
27
23
18
Focal
length
90
60
56
35
Wide (0.36 ×) Tele (0.6 Ч)