Canon EOS 80D - Manual (Page 37)

35
If you turn on the power switch and the date/time/zone setting
screen appears, see page 37 to set the date/time/zone.
<1> : The camera turns on.
<2> : The camera is turned off and
does not function. Set to this
position when not using the
camera.
 Whenever you set the power switch
to <1> or <2>, sensor
cleaning will be performed
automatically. (A small sound may be
heard.) During the sensor cleaning,
the LCD monitor will display .
 You can still shoot during sensor cleaning by pressing the shutter
button halfway (p.44) to stop cleaning and take a picture.
 If you repeatedly turn the power switch <1>/<2> at a short
interval, the icon may not be displayed. This is normal and
not a malfunction.
 To save battery power, the camera turns off automatically after
approx. 1 minute of non-operation. To turn on the camera again, just
press the shutter button halfway (p.44).
 You can change the auto power off time with [52: Auto power off]
(p.60).
Turning on the Power
Automatic Sensor Cleaning
3 Auto Power Off
If you set the power switch to <2> while an image is being recorded to
the card, [Recording...] will be displayed and the power will turn off after the
recording finishes.