Setup, 1 connecting the antenna, 2 connecting your equipment – Kaon HD 3000 User Manual
Page 11

ENG - 11
2. Setup
There are several ways of connecting the receiver to your TV and VCR. Consult your local supplier for assistance in
setting-up your system that is best suited to your requirements.
2.1 Connecting the Antenna
Connect the antenna cable (RF cable) from cable system to the ANT IN jack of the receiver.
Connect a Loop through cable between the LOOP OUT and the ANT IN. (If not connected, you can not record.)
2.2 Connecting Your Equipment
2.2.1 Connecting a TV (SCART/AV jack)
Connect the receiver to a TV with SCART.
Cable system
HD PVR receiver
TV
HD PVR receiver
SCART cable