Lancaster dos rev.c – Epson 900 User Manual

Page 9

Lancaster DOS
Rev.C

A5 size

DOS.FM

2/5/99

Pass 3

Proof Sign-off:
Yano

_______

Nomoto

_______

K.Pipa

_______

After making your changes, exit the default-setting mode by
turning off the printer.

Note:
You may exit the default-setting mode any time by turning off the printer.
Any changes you have made remain in effect until you change them again.

If you want to check the current default settings, enter the default-
setting mode again and print the current settings. Current settings
are indicated with arrows.

Selecting fonts

Your printer has eight built-in character fonts including two EPSON
fonts: EPSON Roman T and EPSON Sans Serif H. (Roman T is similar
to the Times™ font; Sans Serif H is similar to Helvetica™.)

To select a font, enter the default-setting mode. See “Changing the
default settings” on page 8.

Note:
The font selections you make with your software override your printer’s
control panel selections. For best results, use your software to select fonts.

The following table shows the available fonts.

Fonts

Sample

EPSON Courier

EPSON Roman T

EPSON Sans Serif H

EPSON Roman

EPSON Sans Serif

EPSON Prestige

EPSON Script

Draft