Epson 900 - Manual (Page 7)

7
Lancaster DOS
Rev.C
A5 size DOS.FM
2/5/99 Pass 3
R Proof Sign-off:
Yano
_______
Nomoto _______
K.Pipa _______
Character table
Character tables contain the characters and symbols used in different
languages. The printer prints text based on the selected character
table. For the available character tables, see “Character Tables” on
page 28.
Auto line feed
When the Auto line feed feature is on, each carriage return (CR) code
is accompanied by a line feed (LF) code. If your printed text is
unexpectedly double-spaced, set this feature to Off. If text lines print
on top of each other, set it to On.
Network I/F mode
If your printer is connected to a single computer, leave this feature
off. If you want to share the printer with another computer, turn this
feature on. When this feature is on, data may be present in the
printer’s buffer even though the printer is not printing. Always make
sure the printer does not receive data before turning off the printer.
Loading position
If you want to print more lines on a page, set this feature to 3 mm. If
you set the top margin with your software, that setting is added to
the default-setting value.
0 slash
If you want to use the zero character which has a slash, set this feature
to 0 with slash. The slash allows you to easily distinguish between
an uppercase letter “O” and a zero.
Parallel I/F transfer rate
This setting specifies the interface transfer rate. For most printing,
leave this setting set to Fast. If you encounter problems, set it to
Normal.