Epson 900 - Manual (Page 25)

25
Lancaster DOS
Rev.C
A5 size DOS.FM
2/5/99 Pass 3
R Proof Sign-off:
Yano
_______
Nomoto _______
K.Pipa _______
Using the control panel buttons
If you cannot use the print head alignment utility program that came
with your printer, follow these steps to align the print head.
1. Make sure that A4 or Letter size paper is loaded in the sheet
feeder.
2. While holding down the R cleaning button , press the P power
button to turn on the printer. Then release both buttons.
3. The S paper out light flashes for about three seconds. While it is
flashing, press the E load/eject button.
The printer prints a sheet of instructions in English, French,
German, Italian, Spanish, and Portuguese explaining how to
align the print heads. Follow these instructions.
Note:
If you fail to press the
E load/eject button, the printer enters the default-
setting mode. If this happens, turn off the printer and return to step 2.
4. After aligning the print head, turn off the printer to exit the print
head alignment mode.