Epson 900 - Manual (Page 17)

17
Lancaster DOS
Rev.C
A5 size DOS.FM
2/5/99 Pass 3
R Proof Sign-off:
Yano
_______
Nomoto _______
K.Pipa _______
Lights came on and then went out
The printer’s voltage may not match the outlet rating. Turn off the
printer and unplug it immediately. Then, check the printer labels.
If the voltage doesn’t match, DO NOT PLUG YOUR PRINTER BACK
IN. See “Where to Get Help” in your Setup & Daily Use manual.
Only the power light is on
Try one or more of these solutions:
❏ Turn off the printer and computer. Make sure the printer’s
interface cable is plugged in securely.
❏ Make sure there’s no packing material in the printer.
❏ Turn off the printer and computer and disconnect the printer’s
interface cable. Then print an operation check page. See
“Running a printer operation check” on page 11.
❏ If it prints, make sure the printer software and your application
software is installed correctly.
Note:
If you’re trying to print a large image, your computer may not have
enough memory to print.
❏ If the above doesn’t work, replace the ink cartridges. See
“Replacing Ink Cartridges” in your Setup & Daily Use manual.
The paper out light is flashing or on
❏ If the S paper out light is flashing, remove the jammed paper.
❏ If the S paper out light is on, load more paper in the sheet feeder.