Lancaster dos rev.c – Epson 900 User Manual
Page 19

19
Lancaster DOS
Rev.C
A5 size
DOS.FM
2/5/99
Pass 3
R
Proof Sign-off:
Yano
_______
Nomoto
_______
K.Pipa
_______
Multiple pages feed
Remove the stack of paper and:
❏
Make sure the paper is not too thin.
❏
Fan the edges of the stack to separate the sheets, then reload the
paper.
The paper jams
Press the
E
load/eject button to eject the jammed paper. If the error
message does not clear, open the cover and remove all the paper
inside, including any torn pieces. Then load the paper again.
If the paper jams frequently, make sure you:
❏
Use smooth, high-quality paper, loaded with the printable side
up.
❏
Fan the stack before loading it.
❏
Don’t load paper above the arrow mark on the left edge guide.
❏
Adjust the left edge guide to fit your paper.
Paper isn't ejected fully or is wrinkled
Try one or more of these solutions:
❏
If the paper doesn’t eject fully, press the
E
load/eject button. Also
check the paper size setting in your application or printer driver.
❏
If the paper is wrinkled when it comes out, it may be damp or
too thin. Load a new stack.
Note:
Store any unused paper in its original package in a dry area.