Epson 900 - Manual (Page 24)

24
Lancaster DOS
Rev.C
A5 size DOS.FM
2/5/99 Pass 3
L Proof Sign-off:
Yano
_______
Nomoto _______
K.Pipa _______
Aligning the print head
If you find that the printed image is fuzzy or the vertical lines in your
printout are not properly aligned, you may need to align the print
head with the EPSON Print Head Alignment Utility. This utility
aligns the print head to print images clearly. You may need to align
the print head when you transport the printer or move it to a different
place.
Using the print head alignment utility
To use this utility, follow these steps.
1. Insert the EPSON Printer Software CD into your CD-ROM drive.
2. Type D:\SETUP at the DOS prompt. (If your CD-ROM driver has
a different drive letter, or if you are using the floppy version,
substitute the appropriate letter for D:\.) Then press Enter, and
follow the directions on the screen.
3. After running the setup program, type C:\EPCALIB2. If your
hard disk
drive has a drive letter other than “C”, substitute the
appropriate letter. Then press Enter. The following window
appears.
4. Make sure your printer is selected. Click Next, then follow the
directions on the screen.