Epson Perfection V800 Photo - Manual (Page 27)

2. Slide the 4 × 5 inch film into the holder with the shiny side facing up so that images and any wording
on the film strips are not backward. Make sure the entire image frame is positioned in the film holder
opening.
Note: You may need to trim the edges of the film so that it sits properly in the film holder without
bending or warping. Do not cover any of the small holes in the holder.
3. Close the film holder cover and press it down until it clicks into place. Also press down all the edges
of the cover to secure it.
27