ProSoft Technology AN-X-AMX - Manual (Page 44)

Page 40 AN-X-AMXRIO November 2011
Using the Web Interface
The AN-X module contains a webserver capable of communicating with standard web
browsers such as Internet Explorer.
The web interface is used for:
• setting and viewing the AutoMax remote I/O configuration
• viewing AN-X logs
• changing the IP address
To use the web interface, you need to know the IP address of the AN-X. Run AnxInit
and use the Utilities/Locate All AN-X Devices command to find all AN-X devices on the
Ethernet network.
To access the web interface, start your web browser and type the AN-X IP address where
you normally enter web addresses in the browser.
The left pane contains commands. Click on the arrows at the left of the main headings to
expand or contract the sections.
The contents of the right pane depend on the current command being executed.