ProSoft Technology 5210-DFNT-RIO - Manual (Page 24)

RIO ♦ ProLinx Gateway Remote I/O Adapter Status and Error Data
Rockwell Automation® Remote I/O Adapter Driver Manual
Page 24 of 39
ProSoft Technology, Inc.
February 4, 2010
Note: The example addresses shown above assumes RIO Port. Note that each active serial port
will have one of these Error Status data blocks available in the internal database.
Refer to the Error Codes to interpret the status/error codes present in the data
area (page 24).
5.1 Remote I/O Adapter Error Codes
The list of potential error codes reported in the RIO communication status block
are listed below:
Code Description
0 Normal Operation
1 Remote I/O cable disconnected
2 Remote I/O disconnected, rack inhibited
3 PLC faulted or not in run mode, rack reset