ProSoft Technology 5201-DFNT-BACNET - Manual (Page 32)

BACnet Protocol Configuration BACnet ♦ ProLinx Gateway
Protocol Manual BACnet/IP Client Edition 2
Page 32 of 52 ProSoft Technology, Inc.
November 24, 2010
Command list example:
[BACnet Client 0 Commands]
#
# This section contains the commands that will be issued by the BACnet client
# service. Each valid command will be issued to the unit specified using the
# command data entered by the user.
#
# LOCATION :
# DATE :
# CONFIGURED BY:
# MODIFIED :
#
# 1 2 3 4 5 6 7 8 9 10 11
# DB Poll Reg Swap Serv Func Data Point Prop
#Enab Addr Delay Count Code Node IP Address Port Code Type Addr Code
START
0 305 0 7 1 192.168.0.110 47808 14 1 1 85
0 1500 0 7 1 192.168.0.110 47808 16 1 1 85
0 200 0 1 1 192.168.0.110 47808 12 0 1 85
0 205 0 24 1 192.168.0.110 47808 14 0 1 85
0 300 0 1 1 192.168.0.110 47808 12 1 1 85
0 315 0 7 3 192.168.0.110 47808 14 1 1 69
0 325 0 7 3 192.168.0.110 47808 14 1 1 65
0 800 0 1 0 192.168.0.110 47808 12 3 1 85
0 816 0 10 0 192.168.0.110 47808 14 3 1 85
0 832 0 1 0 192.168.0.110 47808 12 4 1 85
0 848 0 6 0 192.168.0.110 47808 14 4 1 85
0 1600 0 1 0 192.168.0.110 47808 15 4 2 85
0 1600 0 4 0 192.168.0.110 47808 16 4 3 85
0 864 0 4 0 192.168.0.110 47808 14 4 3 85
END