ProSoft Technology 5202-DFNT-GRCM4 - Manual (Page 24)

ProLinx Communication Gateways, Inc. 24
06.PLNX.GRCM.OO.01.EN
July 2003
7503 Request Count
7504 Response Count
7505 Errors Sent
7506 Errors Received
7507 Configuration Error
7508 Current Error
7509 Last Error
If the module is configured correctly, the configuration error word should have a value of zero.
Any other value indicates a configuration error. Use the value in the configuration error word to
determine which set of parameters are invalid in the driver configuration area. The following table
lists the bits associated with each configuration error in the word:
Bit Code Description
0 0x0001 Invalid selection for enabled parameter
1 0x0002 Invalid RS Interface parameter
2 0x0004 Invalid Baud rate
3 0x0008 Invalid Parity
4 0x0010 Invalid Data Bits
5 0x0020 Invalid Stop Bits
6 0x0040 Invalid Use CTS Line
7 0x0080 Invalid Rx DB Start
8 0x0100 Invalid Swap Rx Data Bits
9 0x0200 Invalid Rx Start Character
10 0x0400 Invalid Rx Term Character
11 0x0800 Invalid Download parameter
12 0x1000 Invalid Upload parameter
13 0x2000 Invalid Configuration Address
14 0x4000 Reserved
15 0x8000 Reserved
- - - - - - - - - - - - - - - - END OF MANUAL - - - - - - - - - - - - - - - - -