ProSoft Technology 5202-DFNT-GRCM4 - Manual (Page 22)

[Section]/Item Value Range Description
Error Delay Counter 0 to 65536 This parameter specifies the number of polls to be
skipped on the slave before trying to re-establish
communications. After the slave fails to respond, the
master will skip commands to be sent to the slave the
number of times entered in this parameter.
Send with ID Yes or No This parameter specifies if a network ID is to be used.
If the parameter is set to “Yes”, a network ID will be
attached to the command. If the parameter is set to
“No”, a network ID is not used.
Display Article Range 1 – 10 This parameter is set to allow the display of 10 article
names at a time in the database area.
After setting up the configuration file, download it to the module using the Configuration/Debugger
port.
ProLinx Communication Gateways, Inc. 22
06.PLNX.GRCM.OO.01.EN
July 2003