ProSoft Technology 5202-DFNT-GRCM4 - Manual (Page 17)

4 Driver Configuration
In order for the GRCM driver to function, a minimum amount of configuration data must be
transferred to the module from the module’s file system. Care must be taken in constructing the
module configuration parameters. If the module does not function as expected, examine the
configuration file using the Debugger Port on the module. All configuration parameters for the
driver are found under the [GRCM Port x] section. The x in the section name will have a value of
0 to 3 corresponding to the appropriate GRCM port.
The following information provides an example of a GRCM configuration file:
# DFNTGRCM4.CFG
#
# This file contains the configuration for the DFNT/GRCM4 communication
# module.
#
# LOCATION :
# DATE : 05/21/2003
# CONFIGURED BY : JOE
# MODIFIED :
#
# This section is used to define the configuration for the Module level
# data.
#
[Module]
Module Name : Test Example for 4202-DFNT-GRCM4 Communication Module
#------------------------------------------------------------------------------
-
# This section is used to define the configuration for the master device
# simulated on network port
#
[DFNT Client 0]
Minimum Command Delay : 100 #Minimum number of msec's between commands
Response Timeout : 1000 #Response messgage timeout (0-65535 mSec)
Retry Count : 3 #Response failure retry count
[DFNT Client 0 Commands]
#
# 1 2 3 4 5 6 7 8 9 10 11 12
# DB Poll Swap Func File File Elm Sub
#Enab Addr Delay Count Code Node IP Address Slot Code Type # # Elm
START
# 1 200 0 10 0 192.168.0.149 -1 509 N 10 0
# 1 220 0 10 0 192.168.0.149 -1 509 N 10 0
END
[DFNT Client 1]
Minimum Command Delay : 50 #Minimum number of msec's between commands
Response Timeout : 1000 #Response messgage timeout (0-65535 mSec)
Retry Count : 3 #Response failure retry count
[DFNT Client 1 Commands]
#
# 1 2 3 4 5 6 7 8 9 10 11 12
# DB Poll Swap Func File Elm Sub
ProLinx Communication Gateways, Inc. 17
06.PLNX.GRCM.OO.01.EN
July 2003
#Enab Addr Delay Count Code Node IP Address Slot Code # # Elm