ProSoft Technology AN-X-TI - Manual (Page 7)

AN-X-TI-MAS Page 3
Hardware Features
The module has:
• LEDs to indicate the status of the connection to the Ethernet (100
and Link/Act)
• a LED to indicate the module’s internal state and the state of
communication with the ControlLogix (SYS)
• a LED to indicate the state of communications on the TI remote I/O
network (NET)
• an Ethernet connector
• a power connector
• a 9-pin connector to connect to the TI remote I/O network
A watchdog timer is implemented in the module’s hardware. If the
firmware does not kick the watchdog within the timeout period the
watchdog times out and places the module into a safe fatal failure state.
A jabber inhibit timer is implemented in the module’s hardware. If the
network transmitter is on longer than 150% of the longest network
frame time, the transmitter is forced off and the module is placed into a
safe fatal failure state.
Package Contents
• AN-X-TI-MAS module
• CD containing software and documentation
• rubber feet for desktop use