ProSoft Technology AN-X-TI - Manual (Page 11)

AN-X-TI-MAS Page 7
Quick Start
Step See page
1 Install the AN-X Windows software 6
2 Power up the AN-X, connect it to Ethernet and use
AnxInit to assign it an IP address 8
3 Connect AN-X to the TI remote I/O network 5
4 Use the AN-X web interface to autoconfigure the
remote I/O network and ControlLogix
configuration 19
5 Configure the AN-X in RSLogix 5000 33
6 Scan I/O, read inputs and write outputs
7 Use the web interface to create tags for RSLogix
5000 38
8 Import the tags into RSLogix 5000 39
9 Use the tags to access data