ProSoft Technology AN-X-TI - Manual (Page 42)

Page 38 AN-X-TI-MAS November 2011
IMPORTANT!
Ensure that any check box that refers to Unicast connections is
unchecked.
ControlLogix Alias Tags
AN-X uses the Ethernet/IP configuration to create alias tags that can be
imported into RSLogix 5000. Use these tags in your RSLogix 5000
program to access the data on the AN-X. Even if the ControlLogix
address for an I/O address changes, all you have to do is re-import the
tags.
WARNING!
If you change the remote I/O or ControlLogix configuration, re-import
tags so that the ControlLogix processor uses the correct addresses.
There are two sets of tag files, one for exclusive owner connections and
one for input only connections.
In the web interface, select Automation Network/View Configuration
Files
.
To view the files, click either AN-X-TI Ethernet/IP ControlLogix
Exclusive Owner Data Tags
or AN-X-TI Ethernet/IP ControlLogix Input
Only Data Tags .