ProSoft Technology AN-X-TI - Manual (Page 58)

Page 54 AN-X-TI-MAS November 2011
The contents of the right pane depend on the current command being
executed.
I/O Network
Select Automation Network/ I/O Network Configuration to configure the
I/O the AN-X-TI-MAS is to scan.
Autoconfiguration
If you are autoconfiguring the remote I/O network, make sure the
network is connected to the AN-X-TI-MAS.
To configure only the I/O, check Auto-configure TI network.
To configure the remote I/O network and also generate a default
ControlLogix configuration on the AN-X, check Auto-configure TI
network and ControlLogix configuration
Click the Auto-configure Network button.