ProSoft Technology MVI46-MBP - Manual (Page 75)

Reference MVI46-MBP ♦ SLC Platform
Modbus Plus Communication Module
ProSoft Technology, Inc. Page 75 of 101
February 19, 2008
Global In Image
DB
Address Modbus
Address Ix Input Table
Offset* Parameter Description
7130 47131 I:x.0 In File Word 0 Data from Input File Map index 0 for word 0
7131 47132 I:x.1 In File Word 1 Data from Input File Map index 1 for word 1
7132 47133 I:x.2 In File Word 2 Data from Input File Map index 2 for word 2
7133 47134 I:x.3 In File Word 3 Data from Input File Map index 3 for word 3
- - -
7161 47162 I:x.31 In File Word 31 Data from Input File Map index 31 for word 31
7162 47163 Spare Not used
7163 47164 Spare Not used
7164 47165 Spare Not used
7165 47166 Spare Not used
7166 47167 Spare Not used
7167 47168 Spare Not used
7168 47169 Spare Not used
7169 47170 Spare Not used
* x = the slot number in the chassis where the module is installed.
5.7.6 Command Event Data
The command event data controls the master command list. If a command is set
to be controlled by events, then the status of the bits contained in this data set
enable the command for a single instance. Each bit in the event data set is
associated with an individual command. When the bit is set, the command will be
issued once. The bit must be cleared and set again for the command to be
issued again. The first thirteen words of data area associated with the event
command data set contain these control bits. The remainder of the data area
holds data associated with each event. The following table describes the event
data area:
Command Event Control
DB
Address Modbus
Address Parameter Description
7170 47171 Event Control Word #0 Event control bits for commands 0 to 15
7171 47172 Event Control Word #1 Event control bits for commands 16 to 31
7172 47173 Event Control Word #2 Event control bits for commands 32 to 47
7173 47174 Event Control Word #3 Event control bits for commands 48 to 63
7174 47175 Event Control Word #4 Event control bits for commands 64 to 79
7175 47176 Event Control Word #5 Event control bits for commands 80 to 95
7176 47177 Event Control Word #6 Event control bits for commands 96 to 111
7177 47178 Event Control Word #7 Event control bits for commands 112 to 127
7178 47179 Event Control Word #8 Event control bits for commands 128 to 143
7179 47180 Event Control Word #9 Event control bits for commands 144 to 159
7180 47181 Event Control Word #10 Event control bits for commands 160 to 175